82° Flat - Undercut

Used when protrusion of the fastener above the mating surface is unacceptable. Undercut is desired on shorter length screws

Select Drive & Material
Phillips - 18-8 Stainless
Flat - Undercut - Phillips - High-Low - Self Tapping Screws - 18-8 Stainless
Phillips - 410 Stainless
Flat - Undercut - Phillips - High-Low - Self Tapping Screws
Phillips - Zinc
Flat - Phillips - Undercut - High-Low - Self Tapping Screws - Zinc
Six-Lobe - Zinc
Flat - Six-Lobe - Undercut - High-Low - Self Tapping Screws - Zinc